On Tue, Dec 25, 2007 at 09:17:49PM +0200, Alex Joni wrote: > <I only forward the email because the original post was too big to fit on > the list, > I removed the attached image, and put it up at: > http://imagebin.org/12581 > > It will only be there for a couple of days though..
Thanks Alex! > >This apparent Z level sensitivity is interesting. The machine boundaries > >are set at (X -0.01, 6.67), (Y -2.73, 0.01), (Z -6.78, 0.01) putting the > >home origin in the top left upper corner. The part (G54) is then zeroed > >in absolute coord (X2.9361, Y-1.5052, Z-2.1691). All the tool paths > >appear well within the boundaries and I can see no logical reason for > >this dependency. I've restarted the program a number of times during > >these investigations and with the same z zero the errant behaviour is > >repeatable. I used exactly these values and still couldn't reproduce it. If it is repeatable right now on your system, would you tar up your whole configuration directory and send it to me please. The exact G54 offsets etc. will be preserved in the var file. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
