Kirk, Thanks for the reply. Are you suggesting that I do something like you did but in reverse somehow to read the voltage with EMC? I understand that the usb port can handle analog 0-5v inputs from a joystick. Perhaps something that would scale the 0-220vac to 0-5vdc that I could somehow use in EMC with a scaler... dunno I'm thinking out loud right now so anyone have any simple ideas please jump in...
Thanks John On 25 Dec 2007 at 11:18, [EMAIL PROTECTED] wrote: > > If you you just need one channel of ADC, my DAC setup: > > http://www.wallacecompany.com/machine_shop/EMC2/serial_dac/ > > could be modified to run an ADC like the LTC1286: > > http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1155,C1001,C > 1158,P1445,D2760 > > It would take up two parallel port outputs and one input and update at > servo-thread speeds. > > On Tue, 2007-12-25 at 07:37 -0600, John Thornton wrote: > > Anyone use the modbus serial card with EMC2? It has 4 bit analog > > input that could tell me my arc voltage... Also the control pendant > > they sell could be used with the modbus card... Any drawbacks to > > using this? ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
