Hi, sounds nice :)
Was wondering if you had any issues using M66. I see you use it in your code, and I've implemented it pretty recent (just before 2.2.x). I had a bug report about it, which I can't replicate, so any insight if it works for you would be helpful. http://sourceforge.net/tracker/index.php?func=detail&aid=1853953&group_id=6744&atid=106744 Regarding the rebuilding, was it something else besides the number of motion controlled IO that made you recompile? If that is the only thing, then I'll look into either making it a startup parameter, or increasing the default value (4 is a bit conservative nowadays:) Regards, Alex > Guys, > > I did it!!!! > > With no thanks to you guys... no, I am kidding. > > The new M6x codes were the key. And, although I have tons of experience > compiling linux programs, I have never previously needed to compiled EMC > from source. I was forced to successfully rebuild emc-2.2.2 with 48 I/O > for > 3 parallel ports with breakout boards to make this all happen (Pluto-p > board > to come later). > > And now my circa 1993 SMT pick-n-place machine is working like a champ > running on EMC. > > Thank you guys for all your hard work! Let me know if any of you need a > great deal on a stepper motor driver system ( www.probotix.com ). > >>Len > > > > > > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
