On 3 Feb 2008 at 17:42, [EMAIL PROTECTED] wrote: The simplest way that I know of is to add a pyVCP to each config with the info you need. If you used the stepconf there is a check box that creates the empty files you need. All you would have to do is add a few lines to the ini file and a few lines to your pyVCP file and your off to the races...
Some links to get you started. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PyVCP http://www.anderswallin.net/2007/01/extending-axis-with-pyvcp/ > Hi all, > > Now that I have AXIS and EMC2 singing and dancing, I find that I use > three different ini files depending on what hardware I've got on my > minimill. For example, when I have the (horizontal) rotary 4th axis > on there, I have different x,y, and z limits that when it is absent. > The trouble is that I sometimes forget which setup I have running > (despite having created three different startup icons which reference > the three ini files...!) > > Is there some relatively simple way for me to do one of the following: > > 1. change the background color of the toolpath section of the screen > 2. add a label in either the Manual Control tab or on the toolpath > area itself > > Thanks, > Pat ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
