My guess is, you see the line "0000:02:07.0 Bridge: PLX Technology, Inc.: Unknown device 3001"
and you assume that it isn't working, since it says "unknown" rather than "Motenc-Lite". I don't have a Motenc card, but I am certain that this is normal. Linux itself won't know what the motenc is, but EMC will look for a device 3001 and recognize it as the Motenc. As John Kasunich says, you do not provide enough details. Mark --- cnc eafit <[EMAIL PROTECTED]> wrote: > Hi there > I just bought a Motenc-lite card that is suposoused to be > supported by > linuxcnc. But when I booted the system it does not come up. I'm > totally > lost I've been unable to find documentation to fix the problem. > > > thanks in advance > > > CARD: > MOTENC-Lite 4 axes PCI MOTION & I/O control board > > linuxcnc installed form the lastest cd and updated to 2.2.3 > > lspci > 0000:02:07.0 Bridge: PLX Technology, Inc.: Unknown device 3001 > (rev 01) > <[email protected]> > > > <[email protected]> > <[email protected]> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/> _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
