Ben Dugan wrote: > I'm pretty sure I've seen this asked before, but I couldn't find it in > the archives for this mail list. > > I'm running EMC2. I get this error on lines with G2 or G3 in them. (The > code is output from Synergy). If I get this error, is there still a > setting (like INCH_TOLERANCE) that will relax the conditions that > produce this error? > > Also: is this affected by cutter diameter compensation settings, or by > relative vs incremental vs absolute modes? Google has showed me some > mention of this on other mail lists, but I fiddled with those settings > and couldn't resolve it that way. > > Is there a place in the documentation where I can read about this? > > Thanks in advance! > > Ben >
If you are using inches, arc coordinates need to be 4 digits. If using mm they need to be 3 digits. I believe that if you stick to those rules you will have no problems. Regards, John Kasunich ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
