Stuart Stevenson wrote: >Mark, > If you are using the axis interface these work very well. > > (from a previous post) > I have three BOURNS ecw1j-b24-ac0024 encoders I am using for feed >over ride, speed over ride and axis jog. I haven't configured the >speed over ride yet. They may not be the most robust encoders but they >were cheap. :) > > Wow - those are cheap! :)
These encoders are completely different animals. These are quadrature encoders that connect to HAL pins and are read by the encoder module (or by a hardware encoder counter). The Shuttle Xpress is a USB knob, meant mostly for video editors - it has a ring used for "shuttle" control and a dial used for jogging video or audio clips. There are also a few buttons for various other purposes. - Steve ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
