------------------------------ > > Message: 8 > Date: Fri, 18 Apr 2008 21:57:22 -0500 > From: Jon Elson <[EMAIL PROTECTED]> > Subject: Re: [Emc-users] 5 axis cinci > To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii; format=flowed > > Stuart Stevenson wrote: > > Gentlemen, > > Here is a video of my cinci. Notice the dual arm tool changer. It > > is very generic and can do many things. :) :) that's me. > > > > http://www.youtube.com/watch?v=mxxdq6y8z8M > Wow, that is pretty cool! I'm usually not intimidated by big > stuff, but there's a place near the end where the ram holding > the head moves outward toward you, and that made me lean back in > my chair!
Sometimes you find yourself leaning back until you have to take a step to maintain your balance. It is a good thing the machine moves slow. :) > > So, that is using my PPMC board set? Yes, they handle it very well > > Jon > > > thanks Stuart ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
