Yes.. After I added the read funtction to the servo thread. Locked up almost instantly this time... had enough time to open a halmeter and pick the pci8255.0.1.a0 pin. As I was fumbling to set the pin high.. it locked up. This is running trunk.
Thomas J Powderly wrote: > Sam, > On the pci_8255 "hal show pin" you listed, > did that configuration lock up? > it had several inputs. > > re: > "By the way... Got I/O? ;)" > re: > "If any of the pins are set to inputs - it will hardlock the computer > after a certain amount of time." > > thanks for looking into it > TomP > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
