Does it have a timing chart on the last page of the spec sheet? They might be named different.
John On 2 May 2008 at 5:09, aaron Moore wrote: > Hi > > I am having problems configuring a home made stepper machine. I am > using the stepper config wizard, but cannot find values for: Step > time Step space Direction hold Direction setup I cannot find any > reference to these parameters in the MSD542 Microstepping Driver data > sheet. It does allow me to change values for microstep from 2 to 125, > but I do not see this is relevant to stem space, or step time. (A > micro step of 16 seems to work, from trial and error) > > I can run the 'EMC2 AXIS' program that displays when emc is first > started, but some of the letters get miss aligned...is this because > the machine is missing stepps, how can I solve this? > > Also,I am unable to test any axis in the stepper config wizard. Why > would this be? > > Any help would be very gratefuly received > Aaron > > -- > Powered by Outblaze > > ---------------------------------------------------------------------- > --- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save > $100. Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com > /javaone _______________________________________________ Emc-users > mailing list Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users