Thanks Geoff. On 3 May 2008 at 8:14, Geoff wrote:
> On Saturday 03 May 2008 00:43, John Kasunich wrote: > > John Thornton wrote: > > > I started a step and direction timing page on the wiki site. If > > > anyone can add to it that would be great. I use the same format as > > > the stepconf setup page so newbee's won't get confused nor will > > > I... > > > > > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Stepper_Drive_Timing > > > > > > John > > > > Excellent idea! One of those "duh, why didn't we do that a long > > time ago" ones. > > > > Regards, > > > > John Kasunich > snipped > > Hi Guys, > Does anybody have this kind of data for the step-direction drives > that Oatley > electronics sells? I have built a set and tested them rat's nest style > with EMC. I am yet to integrate them with my mill. If all else fails > i'll do it the hard way and post the data here. > > Cheers, Geoff. > > ---------------------------------------------------------------------- > --- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save > $100. Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com > /javaone _______________________________________________ Emc-users > mailing list Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
