Duh! edit those rates to ipm. Dave On May 6, 2008, at 8:37 AM, Dave Engvall wrote:
> Hi, > I'm milling a tapered hole using helical interp. > The program works fine but can't keep up. > With a HSS ball mill I've been millling at 4 ips. > With carbide I could raise that to 10 ips. > > At either speed it maintains speed 'til about 1/2 way thru the > program then starts to pause and go, pause and go., etc. > I tried G64 P0.001 and that didn't help. > Am I missing something? > > The following is a snip of the code about 1/2 way thru the program. > > 242X.0306Y-.0468Z-.1181 > N243X.042Y-.0366Z-.1186 > N244X.0502Y-.0238Z-.1192 > N245X.0546Y-.0094Z-.1197 > N246X.0549Y.0057Z-.1202 > N247X.0511Y.0203Z-.1207 > N248X.0436Y.0332Z-.1212 > N249X.0329Y.0436Z-.1218 > N250X.0198Y.0507Z-.1223 > N251X.0053Y.0539Z-.1228 > N252X-.0094Y.0532Z-.1233 > N253X-.0233Y.0485Z-.1239 > N254X-.0354Y.0402Z-.1244 > N255X-.0448Y.0291Z-.1249 > N256X-.0508Y.0158Z-.1254 > N257X-.053Y.0015Z-.1259 > N258X-.0512Y-.0128Z-.1265 > N259X-.0457Y-.0261Z-.127 > N260X-.0368Y-.0373Z-.1275 > > > Dave > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save > $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http:// > java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users