Lubri-Plate has been a fave of mine for years.
Should be available at electronics supply places.
Emory
On Thu, May 22, 2008 at 12:41 AM, Kirk Wallace <[EMAIL PROTECTED]>
wrote:
> I have a Hobart TIG with really stiff AC/DC+/DC- and AMP range
> selectors. They are eight inch rotary switches with 1/8th inch thick
> blades and wipers. Does anyone have a favorite lube or should I run them
> dry? I tried an electronics cleaner/lube and it turned into a stiff wax.
> (EMC tie in: I can't work on the Shizuoka until I get it fixed.)
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC/EMC CNC lathe,
> Bridgeport mill conversion, doing XY now,
> Zubal lathe conversion pending
> Craftsman AA 109 restoration
> Shizuoka ST-N/EMC CNC)
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Emory Smith
[EMAIL PROTECTED]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
