Kirk Wallace wrote: > That's how I determined that I was getting what I needed, but I was > expecting the tool status line to reflect the tool data with any active > modifications like offset applied. Without putting allot of thought into > it, it seems that TxM6 should just put a tool into the spindle or > toolpost/turret and nothing else. Offsets, lengths, radii compensation > should only be active when invoked, Maybe I'm missing something? >
TxM6 loads the tool, only. G43Hx sets the offsets, only. The tool status line simply tells you which tool is loaded, not which offsets are in effect. EMC does not force you to use the same 'x' in TxM6 and G43Hx. Regards, John Kasunich ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
