I will have to reply to this later tonight, my machine is not here, I
do know that I installed that computer about 4,5,6 months ago from a
freshly downloaded CD from EMC (latest version) and it sat in my house
till I got it out to the machine a couple of weeks ago. I don't know
what I used to set up the hal pins, this is what I will look at
tonight. I think I created a shortcut that is going to the (ini?)files
that I am using to start emc. Tonight I will go and clear my config
files and run the setup per the tutorial John pointed me to and I will
let you know the results. On my other setups I have not had to run
this I have just went in and modified the .ini file and stayed with
what thought was a standard pin out on the LPT port. Andy Ray Henry wrote: On Wed, 2008-09-03 at 09:17 -0500, Andy Holcomb wrote:These are the hal files that I got with the install cd. I went through the hal setup gui and changed the pinout on the lpt port and that was all I changed in the hal files.Let see if this one goes out right on the reply-toLooks like it went to the list only. Let me back up a bit because I've just come into this. 1 -- You installed from a CD. Was it 6.06 or 8.08? 2 -- You started stepconf wizard from the menu and setup some parport pins? 3 -- You started EMC2 from the menu? And you are getting some aberrant behavior from the motors. If these are the three steps you took to get going, the configuration you are running from is in your home directory under emc2/configs/my-mill. If you changed the name during the stepconf session then it will be under that changed name. Rayh ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=""> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users |
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users