OK, i have reinstalled linux because i could not connect to internet
using pppoe with ubuntu/emc2 downloaded from linuxcnc.org as a full CD
image.
Since i know nothing about CVS, and a little bit more about compiling, i
decided not to take that way.
Finally i achieved to install normal ubuntu, then emc2 and rtai kernel
using emc2_install.sh from linuxcnc.org and i'm now using version 2.2.6
Using the supposedly correct config, This time, the error is this:
--------------------------------------------------------------------------------------------------
# Install driver.
loadrt hostmot2
loadrt m7i43_hm2 config="firmware=SV8B.BIT num_encoders=1 num_pwmgens=1
num_stepgens=0"
--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
insmod: error inserting
'/usr/realtime-2.6.24-16-rtai/modules/emc2/hm2_7i43.ko': -1 Unknown
symbol in module
7i43_motion.hal:4: exit value: 1
7i43_motion.hal:4: insmod failed, returned -1
8355
PID TTY STAT TIME COMMAND
Stopping realtime threads
Unloading hal components
--------------------------------------------------------------------------------------------------
What's going on here? i'm using the new driver, but the error is
referred to old driver.
Any ideas?
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
