On Mon, 2008-10-27 at 11:56 -0600, Grant Hess wrote: > Greetings, > > I have a big-iron machine that I have retrofitted to EMC and have > almost completed the integration. > > One remaining issue is still causing me grief. I cannot get a program > to continue running after a M6 command is executed. > > I have a pushbutton on the console that is connected to the > iocontrol.0.tool-changed pin (via parport), but this doesn't seem to > be enough. I'm sure I'm missing something.... 8) > > Can someone point me to some documentation on how to configure using > manual tool change, please. > > Thanks, > Grant Hess.
My guess is that if iocontrol.0.tool-changed goes high, your program should continue. Have you checked this pin with Halmeter to see if it follows your button position? Kirk ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
