I'm not sure where my previous replies went, but they seem to have evaporated.
I do have a loop back signal from iocontrol.0.tool-preprare to iocontrol.0.tool-prepared and it appears to function correctly when a Txx gcode is presented. I have also checked to ensure that the the switch on the panel is actually linked to the iocontrol.0.tool-changed pin correctly. Halmeter shows it change to true when I press the switch. Thanks, Grant. Alex Joni wrote: > Do you have a loopback for the tool prepare? > > Regards, > Alex > > > > >> Greetings, >> >> I have a big-iron machine that I have retrofitted to EMC and have almost >> completed the integration. >> >> One remaining issue is still causing me grief. I cannot get a program >> to continue running after a M6 command is executed. >> >> I have a pushbutton on the console that is connected to the >> iocontrol.0.tool-changed pin (via parport), but this doesn't seem to be >> enough. I'm sure I'm missing something.... 8) >> >> Can someone point me to some documentation on how to configure using >> manual tool change, please. >> >> Thanks, >> >> >> Grant Hess. >> >> > > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users