look here - http://www.vardexusa.com/
I have used carbide and HSS tools to cut threads - single point and milling In aluminum either will work just fine The fine threads can be cut with either Most threading inserts can be purchased with sharp points Hand grinding can be done if careful On Tue, Nov 4, 2008 at 8:06 AM, Dave Houghton <[EMAIL PROTECTED]> wrote: > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 04 November 2008 03:44 PM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] Thread cutting > > I have to cut very fine threads on aluminum, basically Pentax M42 > threads would be the finest thread. > Anyone has an idea for the right insert for this for both inside and > outside threads. > I preferably want to use one tool holder and change inserts. > > Thanks. > > Why not use one tool holder and one insert. > > Regards > Dave > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
