yea, I was typing faster than thinking... wow that is slow... John
On 3 Dec 2008 at 4:00, acondit wrote: > John Thornton <[EMAIL PROTECTED]> writes: > > > > > First you have to "load" an or2 in your hal file with: > > > > loadrt or2 > > > > You need to connect the two inputs to your physical inputs with > net. Lets say > you used pin > > 10 and 11 of the parallel port to bring your signals in... then > connect the > pins to the or2 in's > > like so: > > > > net estop1 or2.0.in0 <== parport.0.pin-10-in > > net estop2 or2.0.in0 <== parport.0.pin-11-in > > > > This has not been tested but AFAIK it is correct... > > > > > Shouldn't the or-connection be like this: > net estop1 or2.0.in0 <== parport.0.pin-10-in > net estop2 or2.0.in1 <== parport.0.pin-11-in > > Alan > > > -------------------------------------------------------------------- > ----- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win > great prizes > Grand prize is a trip for two to an Open Source event anywhere in > the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
