Patrick, I believe you want to put the command 'HOME_SEQUENCE = 1' in the AXIS section you want to home first and then 'HOME_SEQUENCE = 2' in the AXIS section you want to home second, etc. Stuart
On Fri, Dec 5, 2008 at 12:28 PM, Patrick Ferrick <[EMAIL PROTECTED]> wrote: > Hi all, > > I've just re-arranged some parallel port inputs and outputs, so now I > have a pin available for each of the three axes on my minimill. I can't > seem to get ctrl-Home to home anything other than the current axis, even > though I have the following line in my config file: > > HOME_SEQUENCE = 0 1 2 > > (I also tried HOME_SEQUENCE = 0,1,2) > > I have a feeling that the answer to my question is "You need to run a > more recent version of EMC!", since I'm using 2.0.5. (Hey, it isn't > broken.) > I recently tried to load the latest version on a second Dell machine, > identical to the one I've been using for a few years, and had it install > and boot up OK but lock up on me when I ran EMC. I suppose there is a > hardware incompatibility but I don't know what it is. (Maybe there's a > version in between 2.0.5 and the current one that I can actually run :-) > > On a related note, are more recent versions able to home more than one > axis simultaneously, or just in sequence? That would be kind of cool. > > Thanks very much, > Pat > > .................... > Patrick Ferrick > Town of Webb School > Main Street > Old Forge, NY 13420 > > (315) 369-3222 > (315) 369-6216 > .................... > > > ------------------------------------------------------------------------------ > SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. > The future of the web can't happen without you. Join us at MIX09 to help > pave the way to the Next Web now. Learn more and register at > http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
