On Tue, Dec 16, 2008 at 03:58:46PM -0500, Matt Shaver wrote:
> I have a lathe that has an automated tool turret, which I had working
> with a version of TRUNK several months ago. I cvs updated my copy of
> TRUNK and recompiled yesterday and I now have a problem in
> Classicladder. I have one S32 input to Classicladder which is connected
> to the tool prep number from iocontrol. The tool prep number changes
> when a "Tn" block is executed (in MDI), and shows up correctly in the
> HAL configuration display in Axis, both on iocontrol.0.tool-prep-number,
> and on classicladder.0.s32in-00.
>
> The problem is that the value of %W0 in Classicladder stays equal to 0,
> not the value of classicladder.0.s32in-00.
Date: 2008/11/23 01:44:00
Author: cmorley
Branch: HEAD
Tag: (none)
Log:
Created new variables IW and QW to represent S32 in and out pins
instead of mapping them to W variables. Defaults to ten of each.
Aligns us with mainsteam Classicladder. ladder programs will need to
be updated, HAL files will be fine
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
