Tom <kestrel...@...> writes: Youtube videos: If you click on the blue "Watch video in high quality" in the lower rh corner you can see the screen text.
The part in the photos in the down facing side of a triple tree clamp. I like that side because of the visible machine work. The circular ring shaped pockets are for the fork springs. Because I only have 4.9" of Z axis movement on the quill, I have to use two different tool length offset tables: one for the short tools and one for the long tools. I quickly learned that your reference tool has to be the shortest one in the table, since all offset variables must be positive integers. It was actually easier to program the nasty old Bandit III controller for tool offsets - as much as I hate to say it. With Emc2, I wish I had a VMC with an automatic toolchanger. Tom ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
