emc 2.2.8 shows the following error when your gcode is loaded:
Radius to end of arc differs from radius to start:
start=(X-6.3015,Y0.2511) center=(X-6.3015,Y0.4633)
end=(X-6.1515,Y0.1890) r1=0.2121 r2=0.3126
this arc is noncircular by much more than the tolerance emc2 uses for
arcs.
Jeff
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
