>
>
>> I suggest you read the fine manual. It's really quite good; among many
>> other things it tells you what you need to know to get homing working.
>
>
>> If you're running emc2 2.2, see section 6.3 of the EMC2 Integrator's
>> Manual here:
>
>> <http://www.linuxcnc.org/docs/2.2/EMC2_Integrator_Manual.pdf>
>
>
>> If you're running 2.3/Trunk, see section 7.3 here:
>
>> <http://www.linuxcnc.org/docs/devel/EMC2_Integrator_Manual.pdf>
>
>
> Sebastian
>
> I have been reading the MANUAL. Seams on the day I download and printed the
> manuals from this page http://www.linuxcnc.org/content/view/5/5/lang,en/ the
> Users and Integrators manual it link me to the Dec. 4 version of v2.3 on the
> integrators manual and v2.2 on the user manual. I did not catch the manual
> were different version till this morning. I just blew it off as the price
> you pay for free software poor docs.I don't redownload the manuals ever time
> I need to look at them I have a slow connection.
>
> You and Peter say this is wrong
>
>> net Xindex-enable hm2_5i23.0.encoder.00.index-enable axis.0.index-enable
>
> and that I should use
>
>> net Xindex-enable axis.0.index??????? <=>hm2_5i23.0.gpio.P2.005.in
No, for normal homing you dont use GPIO bits at all
I think the confusion comes because I ( and possible Sebastian) mistakenly
assumed from the questions that you asked, that you wanted to do something
fancier than normal EMC supported homing.
Heres what I said in my last email:
##Probably closer to this:
##
##net Xindex-enable hm2_5i23.0.index-enable.00 <=> axis.0.index-enable
##
##( the GPIO access is only appropriate if you need HAL to read the actual
##index input pin, this is unlikely)
This is the same thing that C Radek suggested (the <=> is just for
readability)
> Donnie
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
