Hello all, new to group.
I am in the very final phases of completing my cnc setup.
The last thing I did was set a backlash setting in my ini file. After doing
this and running a test, I noticed that the x-axis motor started freezing up
and loosing steps. Everything was working perfectly before I used a backlash
number.
I was wondering if anyone else has encountered this here. I am thinking that
the backlash repositioning does not adhere to whatever acceleration values you
have set on your system and therefore locks up.
Is there a way to change the acceleration value of the backlash? Will lowering
the acceleration of the system help this?
Any input is appreciated!
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
