Jeff, Ok, I made that change and still does not do what I want. In the file open window, I what to see all the files with a different extension, not .ngc without having to select the all machinable files tag. I have hundreds of gcode files with a .tap extension and I really don't want to rename them just to see the list in EMC. If that can't be done I will live with it but I would think it should be possible to change the default gcode extension. - John Guenther 'Ye Olde Pen Maker' Sterling, Virginia
On Sun, 2009-04-19 at 12:28 -0500, Jeff Epler wrote: > On Sun, Apr 19, 2009 at 11:02:25AM -0400, John Guenther wrote: > > Jeff, > > > > Sorry for my ignorance about EMC at this point, but where do make this > > change? > > In your .ini file, such as ~/emc/configs/my-mill/my-mill.ini. If you > are using stepconf, you have to make this change after you're done > running stepconf, and the change will be lost if you run stepconf again. > > If you do not already have a [FILTERS] section in the .ini file, just > add it at the bottom of the .ini file. > > Jeff > > ------------------------------------------------------------------------------ > Stay on top of everything new and different, both inside and > around Java (TM) technology - register by April 22, and save > $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. > 300 plus technical and hands-on sessions. Register today. > Use priority code J9JMT32. http://p.sf.net/sfu/p > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
