Update. Alex was kind enough to put the 2.3 smp packages here: http://linuxcnc.org/experimental/hardy/smp/
Regards, Eric The reason the second processor is not recognized is due to the rtai kernel which is installed as a part of emc. It does not recognize the second processor. There are packages for pre-2.3 here: http://www.linuxcnc.org/experimental/ These packages were tested with the Intel Atom 330 board and should work for any processors in the P4 family. I do not know if the Athlon x2 falls into that family (anyone ?) and have not had a chance to check the kernel configuration for the available options. Alex J, Steve P - The 2.3.0 packages are on my ftp server if anyone would like to upload those to linuxcnc.org and give them a permanent home. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
