Terry wrote: > I tried to turn one of my screws and watch the screen- > the DRO is much,much greater than the amount the machine > moved. > > my .ini file for each axis was copied and pasted > from my old m5i20 .ini file so I doubt that is the problem > > Is there somewhere else I could be getting the wrong > encoder count from?
Could it be your old m5i20 config was running the encoders in "x1" mode? The hm2 encoder counter always runs in "x4" mode, because this mode gets the maximum resolution out of the encoder hardware. If this is the problem, multiplying your encoder scale by 4 should fix it. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers & brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, & iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
