Thank you a lot. That is what I have been looking for.
Sasa Vilic On Tue, Jun 2, 2009 at 10:44 PM, Kirk Wallace <kwall...@wallacecompany.com>wrote: > On Tue, 2009-06-02 at 20:49 +0200, Sasa Vilic wrote: > > I have modified THC control, to support turning off thc with check box in > > pyvcp. I have done it by adding a two new And components. For every "And" > > componentt, the first input parameter is input from parallel port and the > > second parameter is value of check box. So, if check box is unchecked, > the Z > > axis will not react on inputs. (I know that this could be done with > Corner > > height lock, but this way is faster for machine operator to do it) > > > > The question is: Is it possible to control this second parameter from cnc > > code, instead from check box? This could be usefull because my code > > generator coud detect extremly sharp corner, or small radius and trough > cnc > > code turn off and turn on thc, and release operator of such borring job > :-). > > > > Thank you > > > > Sasa Vilic > > This may help: > http://www.linuxcnc.org/docview/html//gcode_main.html#sec:M100-to-M199: > > I use M10x to set hal pins for my collet closer and cutoff slide: > http://www.wallacecompany.com/cnc_lathe/HNC/emc2/nc_files/ > > You can also set hal pins in g-code with: > http://www.linuxcnc.org/docview/html//gcode_main.html#sec:M62-to-M65: > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > > ------------------------------------------------------------------------------ > OpenSolaris 2009.06 is a cutting edge operating system for enterprises > looking to deploy the next generation of Solaris that includes the latest > innovations from Sun and the OpenSource community. Download a copy and > enjoy capabilities such as Networking, Storage and Virtualization. > Go to: http://p.sf.net/sfu/opensolaris-get > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
