I saw that you have a new list and figured I had better get the previous ones fixed. #1 -- fixed. #2 -- fixed. #3 -- Now depends on mode. If editing (edit button depressed), the selected line will be replaced. If insert mode, the paste buffer will be inserted after the current line. #4 -- If it hurts when you do that, don't do that. :-). I'll take a look at that at a future date.
Keep them coming. Regards, Ken Frank Tkalcevic wrote: > I'm now using 0.1.5, and set up the symlink and that is going fine. > > A few more bugs ... > > 1) If you try to save a new file, or save as an existing file, over the top > of an existing .wiz file (select the file from the file selection dialog), > it gets saved as file.wiz.wiz, that is, it doesn't overwrite the existing > file, it always appends .wiz to the file name. > 2) If you open an existing file to edit, then open another file (or the same > file twice), the contents of the files keep appending to the file already > loaded. > 3) Copy and paste. If you copy and then paste, the paste will replace the > selected line in the list at the bottom. Pasting a new line would be more > helpful. > 4) If the path [WIZARD] WIZARD_ROOT is invalid, the splash screen > disappears, but the main window never appears. The program doesn't exit, it > just keeps running invisibly in the background. > > > About.txt doesn't appear to be used. What is the plan for this? In the > wizards I have created, I have had the need to put some additional text > information under the image eg - "the X coordinates will be dependent on > EMC's diameter/radius mode." Currently I have this as part of the image. > > Also, how have you envisaged the speeds/feeds being set? Is it set using > the speed/feed wizard, then all following commands will use the global > parameters to set the F and S commands? Should the depth of cut be in here > too? For a lathe, I need to set feed rate, spindle speed and depth of cut > for roughing and finish passes. There's also the option of using CSS. Do > you want to standardise the names for these parameters? > > Have you considered how people can add and share their wizards? I see there > is a growing library of .ngc programs scattered over the emc web. I was > think another nice enhancement would be to support .zip files (or .tgz, ...) > as a way to allow people to create and share individual wizards. It might > be an easy way to share the programs, without having to put someone in > charage of maintaining a database of wizards. > > > > >> -----Original Message----- >> From: Kenneth Lerman [mailto:kenneth.ler...@se-ltd.com] >> Sent: Friday, 3 July 2009 5:28 AM >> To: Enhanced Machine Controller (EMC) >> Subject: Re: [Emc-users] GWiz Available for Alpha Testing >> >> I lied about my next action. >> >> My next action was to add a conversational mode to GWiz. If >> the conv button on GWiz is set, hitting "accept" (that's the >> check character) after changing a wizard's variables causes >> it to invoke execution of the wizard gcode in the running >> Axis window as an MDI command. >> >> Pressing the conv button causes all of the wizards in the >> library to be loaded into Axis so that they are available for >> execution. >> >> 1 -- LAZY_CLOSE = 1 must be in the .ini file. >> 2 -- Axis must be in a state that MDI commands will be >> accepted. Out of ESTOP, running, homed, etc. >> 3 -- I have no idea what will happen if there is an error in >> a gcode subroutine. The interpreter probably needs to be >> changed to at least unwind the stack and get back to some >> "neutral" state. >> 4 -- Axis has been changed to accommodate this. You will need >> the development version of Axis. >> >> This is Alpha functionality. I've tested it in a Sim environment. >> >> Ken >> >> Kenneth Lerman wrote: >> >>> See: >>> >>> >> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?GWiz_-_A_Gcode_Wizard_Fram >> >>> ework >>> >>> The only thing that is remotely like a real wizard is the >>> >> Holes on a >> >>> Circle wizard. Feel free to write some real wizards. >>> >>> My next action will be to fix some of the dummy wizards >>> >> that are there. >> >>> Ken >>> >>> >>> >> ---------------------------------------------------------------------- >> >>> -------- Crystal Reports - New Free Runtime and 30 Day >>> >> Trial Check out >> >>> the new simplified licensing option that enables unlimited >>> royalty-free distribution of the report engine for >>> >> externally facing >> >>> server and web deployment. >>> http://p.sf.net/sfu/businessobjects >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> -- >> Kenneth Lerman >> Mark Kenny Products Company, LLC >> 55 Main Street >> Newtown, CT 06470 >> 888-ISO-SEVO >> 203-426-7166 >> >> -------------------------------------------------------------- >> ---------------- >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/blackberry _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users