On Fri, Nov 20, 2009 at 10:26 PM, Leonardo Marsaglia < leonardomarsagli...@gmail.com> wrote:
> Hello guys, i've already asked something similar in the forum but this is a > simpler.. > > I read about the retrofit of the mazak that some of the guys made, and i'm > making tests with an AC motor with a vfd and an encoder.. > > So i was wondering if i can make the spindle turn and stop in a given > angle? > > > It would be could if i can make the spindle turn degree by degree, but i > don't see a gcode to do that. > > I think most machines that position the spindle will reconfigure the system to use the spindle as a C axis. Then they can command the C axis angle for position. > Well thanks in advance for your attention. :) > > Regards. > > Leonardo. > > ------------------------------------------------------------------------------ > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus > on > what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > -- Few will listen, Of the few who listen, fewer still will understand, Understanding does not mean believe, Of the handful who believe, most may not know what to do, Those who even know, how many will actually do ? And the rare ones who have done it....... Need not listen anymore. you can lead a person to knowledge but you cannot make him think ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
