2009/11/30 <a...@conceptmachinery.com>: > I am checking documentation > http://www.anderswallin.net/wp-content/2006_11jog/jog.hal > and here i can see: > linksp joga m5i20.0.in-09 > and > linksp jogb m5i20.0.in-10 > > At the same time in file m5i20_IO_hal > pin 09 and 10 are used for Z axis > linksp Zmaxlim <=m5i20.0.in-09-not > and > linksp Zhome <=m5i20.0.in-10 > > are those pins 9 and 10 from jog.hal and pins 9 and 10 that control limit > switches for Z axis are interfering
I guess they would, yes. Did you get the m5i20_IO_hal from the same source as the jog.hal? (I am guessing http://www.anderswallin.net/2006/11/jogging-emc2/#more-107) I suspect that even if you did Anders never used the two HAL files at the same time. You can't really expect to be able to mix and match HAL files and expect them to work without any modifications, every system is likely to have different pin allocations (especially with the Mesa cards which allocate pins freely depending on how many of each module you declare) -- atp ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users