On Sat, 2009-12-12 at 12:16 -0300, Leonardo Marsaglia wrote: > Hello everybody, > > I'm having a little problem with my stepper configuration. Turns out that I > have two hand wheels (one for X and the other one for the Z) connected to my > mesa board via the gpio pins and linked to an encoder emc module for pulse > readings. > > When I use hal meter the two handwheels are working fine and in the same > way, the counts increase and decrease fine, so when I turn on the machine > and I jog the X axis, it works perfectly but the problem starts when I try > to jog the Z axis, no matter how much I jog it ... snip
Off the top of my head, I would check, very carefully, to make sure your .hal file jog wheel settings for the Z axis match your X. An axis enable or movement loop back to the motion component might be the problem. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
