I updated emc2 to 2.3.4. I think the old version was 2.2.8 which was runing ok. I'm trying to configure the new file hm2-sevo.hal but I can not have any output from the 7i37 I can reed all the inputs from the home-switches but I can not close any output, even when I open (show_hal_configuration) and it show that the output is activated but my multimeter tells no!
A piece of the old 5i20_io: # Connect amp enables to motion controller linksp Xenable => m5i20.0.out-06 --------------------------------------------------------------------------------------- A piece of the new hm2-sevo.hal # ################ # X [0] Axis # ################ # axis enable chain newsig emcmot.00.enable bit sets emcmot.00.enable FALSE net emcmot.00.enable => pid.0.enable #net emcmot.00.enable => hm2_[HOSTMOT2](BOARD).0.pwmgen.00.enable net emcmot.00.enable => hm2_[HOSTMOT2](BOARD).0.gpio.046.out net emcmot.00.enable <= axis.0.amp-enable-out ----------------------------------------------------------------------------------------- What I am doing wrong? Thanks ArnoldRiter mesa cards 5i20+7i33+7i37 dmesg http://pastebin.com/m62ba3103 5i20.ini http://pastebin.com/d4bb9ee0a Old 50i20_io.hal http://pastebin.com/d59ab5a60 New hm2-servo.hal http://pastebin.com/m27b3937f ------------------------------------------------------------------------------ Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
