Maybe the problem is CPU TERMAL TROLLING? I tested one PC, which had BIOS without option to disable CPU TERMAL TROLLING. I did not find any way how to use that PC with EMC2.
-----Original Message----- From: "rng3" <[email protected]> To: "Enhanced Machine Controller \(EMC\)" <[email protected]> Date: Thu, 14 Jan 2010 07:05:49 -0500 Subject: Re: [Emc-users] Latency test numbers confusing > If the GUI latency test gives a result of how EMC will perform I always > wondered if "abusing the computer" during the test does not result in an > overly conservative number. I never use the computer that is running EMC > with any other program until the parts are done. (Am I the only one?) There > can be a dramatic difference between the latency test running by itself or > the test running with everything else we may be doing with the computer at > the same time. On a side note I have just started testing a Dell Optiplex > GX520. When you first start the computer during the first 4 minutes there > are two 250,000 spikes in the test with or without SMI. So far they do not > repeat again even after the computer is on for several hours. Have had > similar results in the 120,000 range with a Optiplex GX260 that I am using > on a mill without any problems. May not be an issue, just have to warm the > computer up before cutting! > ------------------------------------------------------------------------------ Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
