Andy Pugh pravi: >> On 14 April 2010 13:14, Slavko Kocjancic <esla...@gmail.com> wrote: >> >> >> >>> Here are HAL and INI. >>> ... seems that this is problem with AXIS handling longer files. >>> >>> >> net enLatchA or2.0.in0 or2.0.out and2.0.in0 >> net enLatchB or2.0.in1 motion.motion-enabled >> net chPumpA and2.0.in1 charge-pump.out >> net chPumpQ and2.0.out parport.0.pin-09-out >> >> >> http://www.linuxcnc.org/docview/devel/html//man/man9/axis.9.html says >> that motion.motion-enabled is an input. If this is true then the >> or2.0.in1 and motion.motion-enabled pins are unconnected to a signal >> source. >> In PDF integrator manual (V2.3 November 7. 2009) Chapter 8.1.1 the motion.motion-enabled is stated as output!
And this part works as should. (I should rewrite that as estop latch can be used instead) Slavko. ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
