On Wed, 12 May 2010 22:16:13 +0200, you wrote:
>> On 12 May 2010 19:19, Slavko Kocjancic <[email protected]> wrote: >> >> >>> I still prefer to have complete program (or split part) inside travel's. >>> Just in case if somebody ring in the door and that take little more time >>> that I think. Feed hold, jog tool away from job, turn off spindle and coolant. After the interruption, start coolant and spindle then press cycle start is the ideal solution during something you can't leave unattended. But that's not possible. You would have to use the run from here rigmarole instead :( >> Well, perhaps the "Run Anyway?" should be followed by "Are you really >> sure? you do realise that you won't be able to answer the door" >> >> If we are going to have "Run anyway", then it should. >> >> > >Problem is that emc has 1000 lines readahead buffer so it will preload >and check against limits every preload line. >We will fix it, but for now if you all want to run it even if some line >in program is out of limit you must (only in 2.4.0 and further) >add line >[TASK] INTERP_MAX_LEN = 2 > >that will decrease buffer to 2 lines only. Or lie about the limit positions? Steve Blackmore -- ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
