Viesturs Lācis wrote: > I have a question, how do I make onboard LPT port on the D510MO card > to work (there are pins on the board for the LPT port, cable and > bracket with the female LPT port are used to get "normal" port). What > i tried, was entering "lspci -v" command in terminal and here is what > i got: > > > > 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 01) > Subsystem: Intel Corporation Device 4f4d > Flags: bus master, medium devsel, latency 0 > Capabilities: <access denied> > > I suspect that the parallel port is accessed through the ISA bridge, and is probably at the default 0x378 address.
You might get more info if you put "sudo" before the lspci command. Jon ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
