Steve,
I was just issuing the command in MDI. (M64 then enter) I have a
manual jog stick that is used in manual mode. I run both the jog stick
(digital) and the motion.digital-out-02 thru classic ladder like this -
net quillout classicladder.0.in-60 <= motion.digital-out-02 #M64
net quillin classicladder.0.in-61 <= motion.digital-out-03 #M65
I don't have the files here at home so this is mostly being done from
memory, please bear with me!
Paul
----- Original Message -----
From: "Stephen Wille Padnos" <[email protected]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Sent: Wednesday, June 02, 2010 8:39 PM
Subject: Re: [Emc-users] M64 and M65
> Paul Keeton wrote:
>> Gents,
>>
>> Trying to use M64 and M65 to operate a quill. After setting
>> up the I/O's in the config when issuing a M64 or 65 this the error I
>> get -
>>
>> "ERROR: INDEX OUT OF RANGE, 255 NOT IN [0..4]
>> (increase num_dio/EMCMOT_MAX_DIO=64)"
>>
>> When increase the dio count I get another error -
>>
>> "Not enough memory to load pin quillout"
>>
>> Any ideas of how to get through this or why I get the out of memory error
>> in dmesg?
>>
> It may be helpful to post the G-code you're using to control the output
> pins.
>
> - Steve
>
>
> ------------------------------------------------------------------------------
> ThinkGeek and WIRED's GeekDad team up for the Ultimate
> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
> lucky parental unit. See the prize list and enter to win:
> http://p.sf.net/sfu/thinkgeek-promo
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
