Hello again! Now I have two questions, regarding correct G-code for 5 axis machine:
1) If I use G43 to compensate the nozzle length, how is EMC going to behave, when rotary axis are moved? What I want to achieve is that I would like to save appropriate tool length, which corresponds to distance from center of both rotary axis to the point, where water jet has to enter the material (here and after - tool tip) and have EMC conduct any compensating moves along X, Y and Z axis, so that tool tip does not move, when rotary axis are turned. Or are there any other way to achieve that? 2) is following command for G01 move correct?: G01 X10.000 Y 10.00 I0.000 J10.000 C90 The thing I want to find out is: how to properly write G03 move in XY plane with synchronised turn of rotary axis. This particular example would keep the cutting head oriented in the direction of the move. Viesturs ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users