Don Stanley wrote: > Hi All; > Does anyone know the Unregulated input Voltage range and > current requirements for the above USC with a Spindle DAC? > OK, you have the newest boards with the switching power supply, the current consumption is much less that the earlier models, around 150 mA by itself, about 200 mA with the spindle DAC accessory board. The board will run from ~7 to 25 V (the input capacitor is the limiting factor). Current draw will go inversely with voltage, as the switcher makes for a constant power input.
I usually use the 412-109034 wall wart from Mouser, the listed rating is 9 V 300 mA, but in fact it puts out about 11.8 V at light load. Jon ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
