2010/9/10 Andy Pugh <[email protected]>: > On 10 September 2010 16:42, Ed Nisley <[email protected]> wrote: >> >> It seems the Intel D510MO board works fine with the new >> 10.04 SMP version of EMC2, but one must wrap a box & power >> supply around it, then kludge up a parallel port connector. > > You almost certainly need a box and 12V power for any CNC system, and > then a picoPSU is an easy option for powering the MB.
Damn, I did not realise to search and get one of these - I ended up with a PC case, where roughly half of the case is d510 board, and other half - psu. I could have ended up with a much smaller and much more convinient pc case. Thanks for pointing them out so that I can get them at least for the next time. > The P-Port header is pin-to-pin compatible with the Mesa 7i43 > ribbon-cable header, so in some applications is a neater solution than > a conventional P-Port > That sounds cool :)) Thanks for telling that, I would never have thought of such a compatibility with a I/O card. Viesturs ------------------------------------------------------------------------------ Automate Storage Tiering Simply Optimize IT performance and efficiency through flexible, powerful, automated storage tiering capabilities. View this brief to learn how you can reduce costs and improve performance. http://p.sf.net/sfu/dell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
