On Fri, Sep 17, 2010 at 11:21 AM, Jon Elson <[email protected]> wrote:
> Whoops, last message would be
>
> setp ppmc.0.stepgen.04-07.pulse-width-ns 3500
>
> If that hal pin shows up in halshow, then it most likely will
> work fine. DIP switch 10 has to be OFF on the 2nd board
> and you need the extension cable between boards.
>
> Jon
>
> That would be a 24 pin ribbon cable between the P9s ?
Thanks
Don
PS. My questions may sometimes appear trivial. But I
learned a long time ago to never ass-u-me with a
device that can "take a big bite out of steel and
throw it through a vital organ".
>
>
>
> ------------------------------------------------------------------------------
> Start uncovering the many advantages of virtual appliances
> and start using them to simplify application deployment and
> accelerate your shift to cloud computing.
> http://p.sf.net/sfu/novell-sfdev2dev
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
