Does HostMot2 support 7i48 daughter board? On Wed, 2010-09-29 at 08:31 -0700, Peter C. Wallace wrote: > On Wed, 29 Sep 2010, James Louis wrote: > > > Date: Wed, 29 Sep 2010 10:28:08 -0500 > > From: James Louis <[email protected]> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <[email protected]> > > To: "[email protected]" <[email protected]> > > Subject: Re: [Emc-users] 5i20 Servo and General Input / Output > > > > If the 4i68 is a PC104 version of the 5i20 would the sample EMC2 config for > > that work? Is it more complicated than just switching buses? > > The 4I68 is a PC/104-PCI card, not PC/104 so you need to make sure your > carrier CPU is PC/104 plus or PC/104 PCI not just PC/104. The 4I68 is > supported by the HostMot2 driver so the EMC configs should be identical > except > for low level signal names (and the low level names are pretty well hidden by > the sample HAL files) > > > > > ----- Original Message ----- > > From: Peter C. Wallace <[email protected]> > > To: Enhanced Machine Controller (EMC) <[email protected]> > > Sent: Wed Sep 29 10:11:35 2010 > > Subject: Re: [Emc-users] 5i20 Servo and General Input / Output > > > > On Wed, 29 Sep 2010, Sebastian Kuzminsky wrote: > > > >> Date: Wed, 29 Sep 2010 08:50:12 -0600 > >> From: Sebastian Kuzminsky <[email protected]> > >> Reply-To: "Enhanced Machine Controller (EMC)" > >> <[email protected]> > >> To: "Enhanced Machine Controller (EMC)" <[email protected]> > >> Subject: Re: [Emc-users] 5i20 Servo and General Input / Output > >> > >> On 09/29/2010 06:32 AM, James Louis wrote: > >>> Slightly off topic: Speaking of the Mesa 5i23 (and forgive me for weaving > >>> 2 threads together, but . . .) has anybody ever used the PC104 version of > >>> this card? The reason I ask is because a company called Axiomtek makes a > >>> touchscreen with a PC104 port. The combined hardware part numbers would > >>> be: > >>> > >>> Mesa 4i68-4 PC104-PLUS Anything I/O -- 72 I/O bits - 400K Spartan 3 FPGA > >>> Axiomtek GOT-3571T 5.7" VGA TFT Compact Fanless Touch Panel Computer > >>> > >>> The processor is an AMD Geode LX800 500 MHz and I don't know if it could > >>> even run Linux/EMC2. It would be a compact CNC control for under $900US. > >>> Any thoughts? > >>> > >> > >> The hostmot2 driver supports the 4i65 and 4i68 PC/104 AnyIO boards. > >> > >> I don't know about the 4i38, 4i39, 4i34, or 4i69. > >> > > > > The 4I34, 4I38, 4I39 are PC/104 cards (ISA) I have not bothered to make a > > HostMot2 config for these cards so I think they will remain unsupported. > > > > The 4I69 only differs software wise from a 4I68 in that it has a different > > subsystem ID (and needs different firmware files) > > > > > > > >> -- > >> Sebastian Kuzminsky > >> > >> > >> ------------------------------------------------------------------------------ > >> Start uncovering the many advantages of virtual appliances > >> and start using them to simplify application deployment and > >> accelerate your shift to cloud computing. > >> http://p.sf.net/sfu/novell-sfdev2dev > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > > > Peter Wallace > > Mesa Electronics > > > > (\__/) > > (='.'=) This is Bunny. Copy and paste bunny into your > > (")_(") signature to help him gain world domination. > > > > > > ------------------------------------------------------------------------------ > > Start uncovering the many advantages of virtual appliances > > and start using them to simplify application deployment and > > accelerate your shift to cloud computing. > > http://p.sf.net/sfu/novell-sfdev2dev > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > This communication is for the use of the intended recipient only. It may > > contain information that is privileged and confidential. If you are not the > > intended recipient of this communication, the disclosure, copying, > > distribution or use hereof is prohibited. If you have received this > > communication in error, please advise me by return e-mail or by telephone > > and then delete it immediately. > > > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment and > accelerate your shift to cloud computing. > http://p.sf.net/sfu/novell-sfdev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
