Am 30.09.2010 17:42, schrieb Peter Teurlings: > so i can also use this as an emergency stop? Yes, on my machine the emergency stop cirquit holds a relais closed and rf is directly switched by this relais.
> > 2010/9/29 dambacher-retrofit.de<i...@dambacher-retrofit.de>: >> Am 29.09.2010 17:14, schrieb Peter Teurlings: >>> Thanks a lot, >>> I see that you connected all the RF an JF together. >>> is this so everything get's enabled? >>> I just put a single pulse on it at startup so everything gets enabled? >> >> I have the full wiring of this. >> No you need a steady 24V signal to enable. The controller will stop >> immediately >> if the signal is 0V on RF or on the JF+/- direction you are moving. >> >> /ulf >> >> ------------------------------------------------------------------------------ >> Start uncovering the many advantages of virtual appliances >> and start using them to simplify application deployment and >> accelerate your shift to cloud computing. >> http://p.sf.net/sfu/novell-sfdev2dev >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > -- --------------------------------------- Dr.-Ing. Ulf Dambacher Ingenieurbüro für Maschinenbau Ihr Experte für * Retrofit * Funktionserweiterung * Fehlerbeseitigung * Wartung bei Werkzeugmaschinen in Gebrauch Riedweidenstr. 9 79331 Köndringen Tel.+Fax: 07641 9379858 Mobil: 0170 9560075 www.dambacher-retrofit.de i...@dambacher-retrofit.de --------------------------------------- ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
