On Fri, 1 Oct 2010, Don Stanley wrote: > Date: Fri, 1 Oct 2010 16:26:17 -0400 > From: Don Stanley <dstanley1...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: [Emc-users] D519MO Boot Problems. > > Hi All; > To support the Mill upgrades to EMC2 I purchased > two D510MO with 2GB RAM each and the MI-100 > chassis. > (If anyone is interested, the extra $12 and got a) > (temporature speed controlled fan cooled chassis) > (with two 4 inch wide slots and one 5.625 inch wide) > (slot and room for the extra cables) > > The problems are: > On both computers, when I boot EMC 8.04 live disk, in > the "No Change to the Computer mode" using a > USB external CD/DVD drive. All goes well until after > the orange rectangle goes back and forth then the screen > goes to text only with the following message: > udevd-event[1293]: run_program '/sbin/modprob' abnormal exit > > On Computer #1 EMC 10.04 live disk, No Change Mode, > boots fine. Seems to take 10-15 minutes. When done the latency > test does nothing. When I attempt to load a example > machine configuration (.ini and .hal files) also nothing. > All ubuntu function sceme to work fine. > > On Computer #2 EMC 10.04 live disk, No Change, loads > for 5- 10 minutes and starts an endless string of the following messages: > [ nnn.nnnnnnn] SQUASHFS error unable to Read directory Block [287e7275] > [ nnn.nnnnnnn] SQUASHFS error unable to Read metadata cache entry [287e7275] > > Can someone tell me the problem. (I sure hope it's me) > > Thanks > Don >
Just a few WAGs: Ubuntu 8.04 wont work because the hardware on the D510 is too new Your problems with 10.04 (long boot time and disk read troubles) might be due to a bad CDROM image or drive. I'd re-burn the CD at 4X and try the 10.04 again Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
