Dave, can Sheetcam do basic 2.5 D milling (such as drilling holes, pocketing etc).
i On Mon, Oct 11, 2010 at 11:16 AM, Dave <e...@dc9.tzo.com> wrote: > For plasma or basic waterjet cutting I think that Sheetcam is very hard > to beat. > > If you find one that is open source that works, let us know. I looked > for quite a while and in the end was happy to pay the $165 or so for > Sheetcam. > > There is a Linux version of Sheetcam also so if you are doing plasma > with EMC2, you can run it on the same machine. I haven't run the Linux > version of sheetcam yet, I have used the Windows version so far. > > Like most cam software there is a learning curve, but once you get the > hang of it, it is very fast to use. > > Dave > > On 10/10/2010 4:26 AM, Marshland Engineering wrote: >> Can anyone recommend a goo DXF to G-Code converter? Lower cost would be >> great. >> It is for a plasma cutter so I need to order the cutting sequences. >> >> Thanks Wallace >> ------------------------------------------------------------------------------ >> Beautiful is writing same markup. Internet Explorer 9 supports >> standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2& L3. >> Spend less time writing and rewriting code and more time creating great >> experiences on the web. Be a part of the beta today. >> http://p.sf.net/sfu/beautyoftheweb >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > > ------------------------------------------------------------------------------ > Beautiful is writing same markup. Internet Explorer 9 supports > standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3. > Spend less time writing and rewriting code and more time creating great > experiences on the web. Be a part of the beta today. > http://p.sf.net/sfu/beautyoftheweb > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users