Hello again,
My previous issue with proc's is still present, however at this point I am
confident that I am just not getting my post processor syntax correct. It keeps
putting the subroutines after the program, instead of loading subs first.
However, I need to get a run of parts out this weekend, so I have re-configured
everything to spit out plain code.
But I have run into an issue that is a little less obvious to me. The current
part ranges from -.5 to 1.5 in the y axis, the limits of my y axis are -1.5 to
3.5, EMC2 is reporting that line 12 linear movement would exceed joint 2
positive limit. Line 12 is positioning for a profile starting at x.5 y1.0.
Google is not presenting a clear example of this issue and resolution.
This not an exotic machine, just a standard taig right now. Ironically the
parts
are enclosures and mounts for limit switches.
------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
