> On 12/07/2010 09:30 PM, Tom Easterday wrote:
>> I want to be able to jog my machine a fixed small distance (.001") at a
>> press of a button/arrow key/joystick. Currently my joystick or arrow
>> keys moves continuously, which is fine in some cases and not in others.
>> Is there a way to enable, say holding down button 4, on my joystick
>> causes each jog to be a fixed distance?
>>
Take a look here..
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Adding_More_Controls_To_Simple_Remote_Pendant
You can set the fixed move to any size you like and use it with button 4 on
your joystick..
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
